Se puede descargar de http://www.bravaviewer.com
jueves, 16 de diciembre de 2010
Freedwgviewer visor de archivos autocad.
Freedwgviewer, es un programa gratis que permite ver archivos formato autocad (dwg). Permite encender apagar layers, imprimir selecciones de un plano, tiene herramientas de medición, etc. Muy recomendable.
lunes, 22 de noviembre de 2010
Redes Locales (LANs)
Características:
-Baja tasa de error
-Uso de canales de alta velocidad
-Escaso tiempo de propagación de la señal
-Se construyen sobre cable privado
-Fácil de compartir recursos de alta eficiencia
-Comunicaciones cliente servidor (servicio de correo, nombres, fiscos)
-Comunicación distribuida peer to peer
-Simplifica conectividad con otras redes.
Ejemplos
-Ethernet 802.3
-Token Ring 802.5
- Fast Ethernet 802.3
-100 VG: 802.12
-ATM Lan E
IEEE 802
Grupos de Trabajo
- IEEE 802.1 – Normalizacion de interfaz.
- IEEE 802.2 – Control de enlace lógico.
- IEEE 802.3 – CSMA / CD (ETHERNET)
- IEEE 802.4 – Token bus.
- IEEE 802.5 – Token ring.
- IEEE 802.6 – MAN (ciudad) (fibra óptica)
- IEEE 802.7 – Grupo Asesor en Banda ancha.
- IEEE 802.8 – Grupo Asesor en Fibras Ópticas.
- IEEE 802.9 – Voz y datos en LAN.
- IEEE 802.10 – Seguridad.
- IEEE 802.11 – Redes inalámbricas WLAN.
- IEEE 802.12 – Prioridad por demanda
- IEEE 802.13 – Se ha evitado su uso por superstición
- IEEE 802.14 – Modems de cable.
- IEEE 802.15 – WPAN (Bluetooth)
- IEEE 802.16 - Redes de acceso metropolitanas sin hilos de banda ancha (WIMAX)
- IEEE 802.17 – Anillo de paquete elastico.
- IEEE 802.18 – Grupo de Asesoria Técnica sobre Normativas de Radio.
- IEEE 802.19 – Grupo de Asesoría Técnica sobre Coexistencia.
- IEEE 802.20 – Mobile Broadband Wireless Access.
- IEEE 802.21 – Media Independent Handoff.
- IEEE 802.22 – Wireless Regional Area Network
Redes Metropolitanas (MANs)
Características:
-Baja tasa de error
-Uso de canales de alta velocidad
-Tiempo de propagación de la señal regular a bajo
-Cable privado o arrendado (utiliza espacios públicos)
-Fácil compartir recursos con alta eficiencia
-Comunicación distribuida (peer to peer)
Ejemplos:
-FDDI
-DBDB (Con transporte SMDS)
-ATM
Ref: DQDB
-In telecommunication, a distributed-queue dual-bus network (DQDB) is a distributed multi-access[disambiguation needed] networkthat (a) supports integrated communications using a dual bus and distributed queuing, (b) provides access to local or metropolitan area networks, and (c) supports connectionless data transfer, connection-oriented data transfer, and isochronous communications, such as voice communications.
IEEE 802.6 is an example of a network providing DQDB access methods.
FDDI
Fiber Distributed Data Interface (FDDI) provides a 100 Mbit/s optical standard for data transmission in a local area network that can extend in range up to 200 kilometers (124 miles). Although FDDI logical topology is a ring-based token network, it does not use the IEEE 802.5 token ring protocol as its basis; instead, its protocol is derived from the IEEE 802.4 token bus timed token protocol. In addition to covering large geographical areas, FDDI local area networks can support thousands of users. As a standard underlying medium it uses optical fiber, although it can use copper cable, in which case it may be refer to as CDDI (Copper Distributed Data Interface). FDDI offers both a Dual-Attached Station (DAS), counter-rotating token ring topology and a Single-Attached Station (SAS), token bus passing ring topology.
FDDI was considered an attractive campus backbone technology in the early to mid 1990s since existing Ethernet networks only offered 10 Mbit/s transfer speeds and Token Ring networks only offered 4 Mbit/s or 16 Mbit/s speeds. Thus it was the preferred choice of that era for a high-speed backbone, but FDDI has since been effectively obsoleted by fast Ethernet which offered the same 100 Mbit/s speeds, but at a much lower cost and, since 1998, by Gigabit Ethernet due to its speed, and even lower cost, and ubiquity.
Redes Extendidas (WANs)
Características:
-Tasa de error dependiente del medio
-Canales de variada velocidad (300 bps a 10 Gbps)
-Tiempo de propagación de la señal dependiente del medio
-Utiliza medios públicos
-Optimiza compartición de recursos entre distintos usuarios
Ejemplos:
-X.25
-Frame Relay
-ISDN
-ATM (Puede ser LAN o MAN)
martes, 5 de octubre de 2010
martes, 21 de septiembre de 2010
Suscribirse a:
Entradas (Atom)